Irish Crochet Rose and Shamrock Edging

Irish Crochet Rose and Shamrock Edging 



Pattern Directions -
Abbreviations:
ch = chain
dc = double crochet
dtr = double treble
ea = each
sc = single crochet
sk = skip
sl st = slip stitch
sp = space
sps = spaces
st = stitch
sts = stitches
tr = treble

How To Slip Stitch (sl st) = Insert hook in stitch, wrap thread or yarn over hook, pull thread or yarn through the stitch and through the loop on the hook, at the same time. A slip stitch does not add any height and is used to join a chain or stitch to another place in the crochet piece.

For a double treble (dtr), the yarn or thread is wrapped around the hook 3 times before beginning the stitch. How To Do A Double Treble

In this pattern, (depending on your own crochet tension) each time that it calls for a double treble (dtr) in the second row edging directions, you may find that a triple treble will work better for you (if a double treble isn't going to comfortably reach to the stitch that it's supposed to, then you'll know that it will work better to substitute a triple treble for the double treble in that spot). How To Do A Triple Treble

Materials: Use thread size of your choice or yarn weight of your choice. Some of the most commonly used sizes are:
Size 10 cotton thread with a size 8 steel hook
Sport weight yarn with a size F hook
Worsted weight yarn with a size G hook

Rose Directions
Rose, Starting Chain: Chain 6. Join (with a slip stitch) to form a circle.
Rnd 1: ch 5 (counts as first dc and first ch-2), * Dc in circle, ch 2 **, repeat from * to ** 4 more times, join with sl st in the 3rd ch of the beginning ch-5 of round. (There should be 6 ch-2 spaces in this round.)
Rnd 2: ch 1, sc in same stitch as sl st just made at end of previous round, * 5 dc in next ch-2 sp, sc in next dc, **, repeat from * to ** around.
Rnd 3: ch 1, sl st in base in the back of the sc just made at end of previous row, * ch 5, sc in base at the back of next sc (between petals) **, repeat from * to ** around. (When finished, if the ch-5 loops are in front of the petals, pull on the chain-5 loops so that they are behind the petals, before working the next round.)
Rnd 4: ch 1, then work (sc, 7 dc, sc) all in first ch-5 sp * (sc, 7 dc, sc) all in next ch-5 sp **, repeat from * to ** around.
To finish rose: End off. Weave in ends.

For photos showing how to do parts of the rose pattern above, see this web page: http://web.archive.org/web/20070311190558/http://crochet.about.com/library/weekly/aa030803.htm

Edging Directions -
First, make the number of individual roses that will be needed for the length of the edging.
Edging is started with a shamrock: Chain 18, sl st in the 10th ch, to form a circle with part of the chain. (3 sc, 3 dc, 3 tr) in the ch-10 circle just made (this will cover half of the circle). Next, join to a rose by doing a sl st in the 4th dc (center) of any outside petal of a rose (be sure right side of rose is on the same side as right side of the started shamrock), then continue to crochet the rest of the shamrock circle, as follows: (3 tr, 3 dc, 3 sc) in remainder of the ch-10 circle (first shamrock leaf formed). Ch 10, sl st in the 10th ch of the beginning shamrock chain (this is the same spot as the base of first leaf made), for next leaf: work (3 sc, 3 dc, 6 tr, 3 dc, 3 sc) all in the ch-10 circle just made. When forming third leaf, join to next rose, as follows: Ch 10, sl st in the 10th ch of the beginning shamrock chain, (3 sc, 3 dc, 3 tr) in the ch-10 circle just made (this will cover half of the circle). Next, join to a rose by doing a sl st in the 4th dc (center) of any outside petal of a rose (be sure right side of rose is on the same side as right side of the started shamrock), then continue to crochet the rest of the shamrock circle, as follows: (3 tr, 3 dc, 3 sc) in remainder of the ch-10 circle. Sl st in base of leaf. To form shamrock stem: sc in ea of remaining 8 chains of the beginning ch-18. End off. Weave in end.

Begin another shamrock: Follow directions same as for first shamrock. The only difference is that, when you are ready to slip stitch the first shamrock leaf to a rose, instead of attaching to a new rose, you will be attaching (with a slip stitch) to the right-hand side of the last rose that you attached to the previous shamrock.
Continue for length needed: Continue making additional shamrocks and attaching roses until you have the length that you want for your edging.
Second Row: This row will be worked along the top of the joined roses and shamrocks (the top is the side with the shamrock stems.) Join thread to the center stitch of a petal of the first rose (this should be the petal which is two petals over to the right away from the petal that a shamrock leaf is attached to), ch 8, * dc in center stitch of next petal, ch 4, dtr in the sl stitch connection between the shamrock and the rose, ch 4, dc in center of side of leaf, sl st into end of stem, ch 3, skip 3 sts of stem, sl st in next st, ch 3, dc in center of side of next leaf, ch 4, dtr over connection, ch 4, dc in petal of next rose, ch 4; repeat from *.
Third Row: Ch 1 to turn, sc in ea st of previous row (in other words, sc in ea dc and in ea dtr, with 3 sc in ea ch-3 space and 4 sc in ea ch-4 space).
Fourth Row: ch 6, * skip 3 sts, dc in next sc, ch 3; repeat from *, with dc over dc of first row.
Fifth Row: Ch 1 to turn, sc in sc, 3 sc in ch-3 space, repeat across row.
To finish: End off. Weave in ends.

For comparison, here's what the 1917 Rose and Edging Directions said, exactly as written and in its entirety - 1917 Rose Directions
Materials: Richardson's R. M. C. Cordonnet No. 80 and a No. 12 hook.
For The Roses: Make 6 ch sts, join, forming a circle, 5 ch sts.
First Row: * 1 d c into circle, 2 ch sts; repeat * for 6 sps, join.
Second Row * 1 s c, 5 d c over sp, 1 s c into d c, forming 1 petal; repeat * for 6 petals.
Third Row: * 5 ch sts, 1 s c back of s c between petals; repeat * for 6 loops.
Fourth Row: * 1 s c, 7 d c, 1 s c into each loop completing rose; break thread. Make enough roses for length required.
Edging (1917 Directions): Make the roses. For the Shamrock, make 18 ch sts, sl st into the 10th st, forming circle.
First Row: 3 s c, 3 d c, 3 t c, sl st to center of petal of rose, 3 t c, 3 d c, 3 s c, all into circle, forming 1st leaf, 10 ch sts, sl st into the 10th st, 3 s c, 3 d c, 6 t c, 3 d c, 3 s c into circle, forming 2nd leaf, repeat first leaf joining to next rose, 8 s c over stem; break thread. Join rose and shamrock alternately for the length required.

Second Row: Join thread to center of petal of rose, 6 ch sts, * 1 d c into next petal, 3 ch sts, 1 d t c, over connection between shamrock and rose, 3 ch sts, 1 d c into center of side of leaf, sl st into end of stem, 3 ch sts, skip 3 sts of stem, sl st into next st, 3 ch sts, 1 d c into center of side of next leaf, 3 ch sts, 1 d t c over connection, 3 ch sts, 1 d c into petal, 3 ch sts; repeat *.
Third Row: 1 sc into each st of previous row.
Fourth Row: 7 ch sts, * skip 3 sts, 1 d c into next s c, 3 ch sts; repeat *, making dc over dc of first row.
Fifth Row: 1 sc into each st of previous row.
- - End of 1917 directions.