Fathers DAy Crafts

Great gifts and Sites for DAd and fathers
http://www.holidays.net/father/index.htm

Lots to choose from on this site
http://www.fathersdaycraftbox.com//

Tons of really cute crafts. I love the BBQ bottle

Poem
What makes a Dad
God took the strength of a mountain, The majesty of a tree,
The warmth of a summer sun, The calm of a quiet sea,
The generous soul of nature, The comforting arm of night,
The wisdom of the ages, The power of the eagle's flight,
The joy of a morning in spring, The faith of a mustard seed,
The patience of eternity, The depth of a family need,
Then God combined these qualities, When there was nothing more to add,
He knew His masterpiece was complete,
And so, He called it ... Dad

http://www.angiesrealm.com/fathers-day/crafts/

Father's Day Crafts

Easy homemade crafts and projects for making father's day extra special, homemade crafts are a very personal way of showing how much your dad means to you on fathers day.

Father's Day Gift-Wrap for your Crafts

1/2 cup flour
1/2 cup cold water
1 1/2 cups boiling water

Mix the flour and cold water together in a small cup. Add the boiling water and heat on low until mixture starts to boil, stirring constantly. Set mixture aside to cool completely.
Divide into portions and add different colors of food coloring.
Create designs on paper using fingers, fists, old combs, toothbrushes, etc.
Use to wrap up gifts for dad on Father's Day.

Craft
Fishing bucket Craft
Materials
Scribbles Dimensional Fabric Paint
SC121 Bright Red
Collage Pauge Instant Decoupage
Cardstock, brown and cream
Aleene's Original Tacky Glue
Bucket
Photos
Scissors
Marker
Yarn, green
Brush
Tissue paper, green, royal, turquoise, light blue
Steps:
1.Tear strips of tissue.
2.Working in sections, use brush to apply Collage Pauge to surface of bucket, immediately press on tissue.
3.Carefully brush another coat of Collage Pauge over top of tissue. Cover remainder of bucket. Keeping lighter colors towards the top. Overlap the colors to create interest. Then, let it dry.
4.Wrap yarn in a wavy pattern around the bucket and then glue it down.
5.Cut out photos of your kids and pictures of fish from magazines, internet or computer print outs. Arrange kids to determine size of boat. Sketch boat and cut out.
6.Draw planks onto boat with marker.
7.Position and glue kids to backside of boat.
8.On front side of the boat, write "We love you, Dad" or some similar message with Scribbles Fabric paint. Let this dry as well.
9.On cream colored cardstock write "Fish All Day" or your own message and let dry. Cut out around letters.
10.Glue boat with kids to center of bucket and glue "Fish All Day" towards the top of the bucket. Let glue dry.
11.Glue additional fish around the sides of the bucket. Let dry.
12.Present as a loving gift!

From Marthas Crafts Bike Mialbox

Found HERE

Clay Pixie / cupid

Found this darling pixie tutorial over on the fantasy clay blog spot.Easy to follow tutorial found HERE

Crackle Fried Marbles

I see the crackle fried marble is back in fashion again.
Mother and I would make these by the cake pan full and turn out jewelry and crafts for months.
Dangle earrings, necklaces, car dangles, key chains ,we glued them on clear glass and filled the fish bowl with them.
Here is a few methods for the fried,crackle glass.
We only used the oven method 45 years ago.Lost about 3 out of every 30 that flat shattered into tiny pieces.So don't worry when they don't all come out perfect.



How to Make Fried Marble Jewelry

Frying marbles is a very simple process and makes some really pretty jewelry.
Difficulty:EasyInstructions
things you'll need:

Bag of solid color, transparent marbles.
Frying pan
Wooden spoon
Large Pot
Cold Water
Ice
1 Place the marbles in the frying pan. I used a non-stick pan, but I don't think it matters as there's nothing sticky that will ruin your pan. Turn the heat to medium high.

2 Fry the marbles, stirring a lot. I wouldn't say "stir constantly," but you want to keep them moving so that they don't heat up too much in one spot. Fry them for 15-20 minutes.

3 While the marbles are frying, or you before you start, fill up a large pot with cold water and lots of ice.

4 When finished frying the marbles, immediately pour them into the ice water. The marbles will shatter on the inside while retaining their round shape on the outside. It resembles shimmering glass.

5 The first picture above shows a finished necklace I made by creating a cage with sterling silver wire and attaching to a sterling silver chain. You can easily change the marble to a different colored marble by pushing open the back of the cage, popping out one marble, and replacing it with another. Wire wrapping is a technique that takes some practice and more instructions. I'll try to post a tutorial for that soon. But, there's an easier way to make a necklace and this is my best seller.

6 Blue, White (Clear), and Green Fried Marbles

Buy some pre-assembled wire bead cages. There are many online sources and can also be found at any craft or beading store. Thread a chain, ribbon, or cord through the bead cage. Then, insert your fried marble by pushing open the middle of the cage and popping the marble into the cage. The bead cage will spring right back to it's original shape. Wear and enjoy!

Oven Method

Make inexpensive   by baking and internally cracking ordinary marbles. Make up a few as gifts or for your next hot seller at a craft fair.
Difficulty: Easy
Things You'll Need:

Pie Pan
1 Bag Of Marbles
Bowl Of Ice Water
Oven
Jewelry Bell Caps
E6000 Glue
Jewelry Jump Rings
Necklace
2 Pairs Of Needle Nose Pliers

1.) When you purchase your marbles, purchase can any regular, one color or cat eye marbles. If you use a two tone color marble the marbles will not get a crackling appearance, instead they will just crack in half.

2.) In a medium size, metal bowl place 3 cups water and five ice cubes. For each batch of marbles that you fry be sure to replace the ice cubes. The marbles need to go from a fire, hot oven right into freezing, cold water in order to create the crackling affect.

3.) Place marbles in a metal pie pan and place them in a 500 degree oven for 20 minutes to heat them thoroughly. There might be a few that will crack in half while you are heating them up. This is O.K. and perfectly normal.

4.) Remove the marbles from the oven after 20 minutes. Pour them directly from the pie pan into the ice cold water. Let them cool for about a minute. When you remove the marbles from the water you may find some have broken, if they do just throw them out. It's the marbles that are in intact but have a crackling effect inside and out that you are going to use for the next step.

5.) Dry each marble completely. Place E6000 glue on the bottom or underside of each bell cap and place it on the top of each marble one at a time. The glue does dry to the touch fairly quick but you can not wear the necklace for 24 hours until the glue has completely setup.

6.) When the bell cap is dry, usually within 24 hours add the jump ring to the bell cap. To attach the jump ring to the bell cap you will need two sets of pliers. Hold one set of pliers in each hand. Place the jump ring in your left hand pliers, holding the rings left side with the split side up. Take your pliers in your right hand and gently grasp the right hand side of the jump ring and push backwards to open it. Slip the bell cap hole in the split ring. Place the necklace inside of the opened split ring to. Be careful that the necklace does not go into the bell cap hole, just the split ring should be in the bell cap. Then use both sets of pliers, one on the right hand side of split and one on left hand of split to gently rock the ring back and forth, moving it closer to closing the split ring gap.

Mold making

Crystal Eggs

Found on Martha Stewart and Professor Figgy's site.

These wonderful crystal Eggs.

What a great way to spend time with a child and make your own crystals.

The whole kit id offered on Figgys site for only 20.00 dollars along with a few other great kits.

Check out the sites and enjoy the science !

Tools and Materials

•Blown-out eggshell (Get the How-To)
•Alum powder
•White glue
•Small paintbrush
•Plastic or glass container
•Egg dye
•Hot water
•Craft stick or spoon
•Latex gloves
•Drying rack or newspaper
Crystal Egg Geode How-To

1. Start by blowing out a large white chicken egg (Get the How-To) and splitting it in half, lengthwise. The egg can be cracked by striking it against a surface or cut with a small pair of scissors. Make sure the inside of the eggshell is clean and dry.

2. With a small paintbrush, apply white glue to the inside and cracked edges of each half of the eggshell and sprinkle with alum powder until completely coated. Set eggshell halves aside to dry overnight.

3. The next day, prepare your growing solution in a glass or plastic container by using a craft stick or spoon to mix 2 cups of very hot water (almost boiling) with an entire packet of powdered egg dye. Be sure to wear latex gloves to protect your hands from the dye. (Tip: Liquid food coloring can also be used to dye the geode -- 30 to 40 drops will adequately saturate the solution.)

4. Add 3/4 cup of alum powder to the hot dye bath and stir until completely dissolved. If there are remaining crystals in the bottom of the container, place the solution in the microwave for a few minutes to dissolve them. This will prevent alum from being drawn away from the geode.

5. Once the alum is completely dissolved, let the solution cool slightly (for about 30 minutes) and then submerge one of the dried, alum-coated eggshells in the growing solution, allowing it to rest on the bottom of the container with the inside of the shell facing up.

6. Set the container aside in a safe place overnight to allow the crystals to grow undisturbed. (Tip: The longer the eggshell is in the solution, the larger the crystals in the geode will be. Twelve to 15 hours will usually result in a perfect geode.)

7. The next day, remove the geode from the growing solution very carefully (as wet crystals are quite fragile), being sure to wear latex gloves to prevent the dye from staining your hands. (Tip: If you are not satisfied with the size of your geode crystals, return the geode to the growing solution and wait a day or two. As water evaporates from the solution, more alum will be deposited in your geode, increasing the size of the crystals.)
8. Place your geode on a drying rack or newspaper and allow to dry completely before handling.
9. To grow a second geode in the other half of the eggshell, simply re-dissolve the crystals remaining at the bottom of the growing solution in the microwave and follow the instructions above starting at step 5.

Additional Tips
Geodes can be grown without using egg dye. The resulting crystals are clear to milky white, like quartz.

Easter Egg Money Holder

Easter Egg Money Holder Tutorial Found HERE

FLEXIBLE MOLD

FLEXIBLE MOLD COMPOUND
This is new mold material is much superior to ordinary gelatin (mold glue) and is very easily made. It does not shrink or dry out like ordinary casting gelatins. If made according to directions it will retain all its original qualities indefinitely, and can be remelted when necessary.
FORMULA:
Flake Gelatin . . . . . . . 4 1/2 pounds
Water . . . . . . . . . . . . 4 1/2 pints
Glycerin . . . . . .. . . . . 9 pounds
Glucose . . . . . . . . . . .1 pound
Denatured Alcohol . . 1 ounce
PROCESS: Place the gelatin in a large container and pour the water over same; then cover container with damp cloth to prevent evaporation. Mix up thoroughly with the hands every ten minutes to keep water evenly distributed, otherwise the bottom will absorb too much water and the top portion will dry out and harden. Replace cloth after each mixing. After gelatin is thoroughly softened, squeeze out all surplus water (if any), and place in double boiler and melt. A few minutes after it begins to melt start stirring and keep stirring until the gelatin is all melted and free from lumps. Then add the glycerin (which should have previously been heated) and stir until blended. Continue to stir until all ingredients are thoroughly incorporated and remove from fire. Now add the alcohol and stir until thoroughly blended with the rest of the mixture. The compound is now ready for use. Do not add water when remelting.

A double boiler can easily be made by using two metal buckets or pans, one larger than the other. Put a few stones in the bottom of the larger container and partly fill with water. Then put mold compound into smaller container and place it in large container. There should be enough water in large container to come up at least half way on outside of small container. The stones are to prevent the small container from touching the bottom and thereby burning the mixture. Leave unused material in container in which it was melted.

HOW TO GET THE ABOVE COMPOUND TO MAKE MOLDS: First select the article you desire to duplicate. Almost all articles can be duplicated, such as celluloid novelties, metal toys, dolls, etc. Articles cast in compositions, book-ends, emblems, etc.

If the article to be cast is very simple, with one entire side flat like a book-end, emblem, or plaque, it is only necessary to lay it on some flat, smooth surface, like glass or marble, face up. Place a frame of wood or metal bars around it, having oiled the object and other parts well; then pour the pliable mold composition over it. However, for more complicated things such as door stops and novelties in forms of dogs, cats, dolls, etc., you will have to make a mold in two pieces.

To make two piece molds, plaster should be used to reinforce the mold. To make good molds you must bear in mind that both this compound and rubber gives under the weight of the casting material. Therefore, some means must be used to hold molds made from these materials in shape. It must be made so that the mold can easily be removed from the reinforcing shell so that the mold may then be removed from the casting without damaging it.

After you have applied the molding composition or last coat of rubber and compound starts to set - spread about 1/2 inch thickness of plaster mortar over it with a trowel, let set and then remove it. For full body molds in two parts - make one half, let it stand until set, cut notches in the plaster shell around the edge that will be spliced to the other half and then apply rubber and plaster to the other half. To prevent the plaster sticking, coat the splice edge of the first half with two coats of ordinary rubber cement.
RUBBER MOLDS
GUTTA-PURSHA MOLDS:
Purchase a sheet of GUTTA-PERCHA, about one-fourth of an inch thick. Cut it about size desired. Soak it in NAPTHA (which causes it to swell), then soak it in hot water. This makes the sheet of Gutta-Percha soft and mushy in appearance, somewhat like a wet rag. Then in this condition, press it against your model, slowly but firmly.
When there are small cavities such as the mouth or eyes of a figure, be sure that you get the rubber all the way in . . . the better you press it, the sharper the mold will be.
Try it on a plaque first, for that can be made in one piece mold. When it is sufficiently pressed, have some plaster mixed and pour it over the mold. This will harden quickly and so hold your rubber mold (Gutta-Percha), in place until it gradually dries out. It will then retain its shape. This plaster shell should always be used to hold mold rigid while casts are being made.
To make a mold of a figure in the round (showing both sides) the mold must be made in two pieces, with shell of plaster to hold them in place, same a described previously.

Pipe cleaner roses made by Donna

Pipe cleaner roses so easy by Donna

Tutorial found HERE

PomPoms

MAKE THE PERFECT
POM POM


(Basic Finger Directions)


Forget about expensive store bought pom poms. Make your own. Here's how:
Start with some nice orlon acrylic yarn like Red Heart Super Saver Yarn
Wrap the yarn around your 2nd and 3rd fingers about fifty times.
Slide yarn off your fingers and tie it tightly in the middle with a small piece of yarn.
Take sharp scissors and trim off the edges, cutting all the loops.
When you're done you should have a pom pom about 3/4" to 1" in diameter. For larger pom poms use more wraps and three fingers. Experiment to find your perfect formula. Use the pom poms to create all kinds of animals, ornaments and other craft items.
 
Can also use a cardboard piece or a round wood disk.
Projects  tutorials found HERE  Lots of Pom Pom animals to make.

Spring Just Ducky

Spring Craft Ducky

Find the cute little ducky pattern PDF Dow and the instructions to make  HERE



Rock Painting for the Kids

It’s a blast from the past with '70s-style rock art that combines color, shape and texture. Cathie Filian and Steve Piacenza are full of crafty ideas guaranteed to rock your world! Planet Earth is the inspiration for amazing pebble paintings, stepping stones receive a personal touch, and paperweights and lucky bamboo bring a Zen presence to any desk.

Materials and Tools:
1/4" thick plywood (cut to desired size)
3/4" thick molding (enough to go around the plywood)
saw
miter box
wood putty
putty knife
wood embroidery hoops (different sizes to fit the design)
small aquarium pebbles (different colors)
natural pebbles
E6000 glue
large amount of Mod-Podge or other découpage medium
craft paint
paintbrushes
finishing nails and hammer
picture hanger

Steps:
1. Using a saw and miter box, cut mitered edges into the molding to create a frame for the plywood. Attach the molding to the outside edges of the plywood with finishing nails.

2. Fill any gaps between the plywood and the frame with wood putty. Next, apply a small amount of putty around the perimeter of the plywood where it meets the molding frame and let dry.

3. Paint the frame and plywood interior a color that will match the rocks. Based on the design pattern, paint each of the inside hoops with craft paint and let dry.

4. Place the hoops on the plywood according to the pattern and glue in place. If desired, cut the hoops apart, remove a section and place the hoops in an interlocking pattern with another hoop.

5. Fill the hoops with colored aquarium rocks. Fill the remainder of the plywood base with natural pebbles.

6. Pour découpage medium over the surface of the artwork. Brush the medium evenly over the frame to create a uniform sheen.

7. Let the découpage medium dry flat for 2 weeks. Attach a picture hanger to the back to hang or use flat as table decor. If hanging on the wall, use an anchor to support the weight.

Check out all the great projects
From DIY http://www.diynetwork.com/decorating/a-blast-of-rock-art/index.html

Eggs are fast Rolling

This is a pretty mosaic egg found over at instructables.
Great they way it is  !

Now combine this with the glue egg and I bet you would have a great egg display item.

Instructions found HERE

Crochet Horse Vintage Pattern

Materials Required—The following AMERICAN THREAD COMPANY Products:

9 ½" HORSE. (Top of head to feet) "STAR" PEARL COTTON, Size 5. 60 yd. Balls. 8 Balls White and 1 Ball Red. Steel Crochet Hooks No. 4 and 8. Work with two strands of thread.

13 ½" HORSE. "DAWN" KNITTING WORSTED, 1 ¼ oz. Skeins. 4 Skeins Brown and 1 Skein Tangerine or Orange. Bone Crochet Hooks No. 3 and 6. Work with single yarn.

Cotton or Kapok for filling.

17 ½" HORSE. "STAR" COTTON YARN, 100 yd. Skeins. 7 Skeins Black and 1 Skein White. Crochet Hooks No. 6 and G. Work with double yarn.

BODY. With White and Large Hook ch 38 and work 37 s c on ch. Ch 1 to turn each row. 2nd and 3rd Rows—2 s c in first s c, 1 s c in each remaining s c. 4th and 5th Rows—1 s c in each s c. 6th Row—Increase 1 s c at beginning of row and work 2 rows even. 9th and 10th Rows—Increase 1 s c at beginning of each row. 11th Row—Increase 1 s c at beginning of row and work 4 rows even. 16th, 17th and 18th Rows—Decrease 1 s c at beginning of each row. 19th Row—Start Neck—Work 1 s c in each of the first 17 s c, ch 1, turn. 20th Row—Decrease 1 s c at beginning of row, 1 s c in each remaining s c of neck. 21st Row—1 s c in each s c. Repeat the 20th and 21st rows 3 times. 28th Row—Decrease 1 s c at beginning of row, 1 s c in each remaining s c, ch 12 for head, turn. 29th Row—11 s c on ch, 1 s c in each s c of neck. Next 14 Rows—Decrease 1 s c at beginning of each row, break thread.

LOWER SECTION OF FACE. Attach thread at neck edge in the 28th row and in the first st of the ch 12 and work 1 s c in each of the next 10 sts of ch, 2 s c in last st, ch 1, turn and work 3 more rows even. 5th Row—Decrease 1 s c at beginning of row and work 1 row even. Next 4 Rows—Decrease 1 s c at beginning of each row, break thread. Attach thread in first s c of 18th row and work 1 s c in each of the next 14 s c, ch 1, turn. Decrease 1 s c and work 1 s c in each of the next 13 s c, ch 1, turn, decrease 1 s c and work 1 s c in each of the next 12 s c, then work 1 s c in each s c across back, 1 s c in each row of neck, 1 s c in each s c at top of head, continue working around head and down the front to the first row without breaking thread.

START FRONT LEG. 2 s c in first s c of opposite side of ch 38, 1 s c in each of next 8 sts, ch 1, turn. 2nd Row—Decrease 1 s c, 1 s c in each of the next 9 s c. 3rd Row—Increase 1 s c at beginning of row. 4th Row—Decrease 1 s c at beginning of row. Repeat the 3rd and 4th rows 3 times. 11th Row—1 s c in each s c. 12th Row—Decrease 1 s c at beginning of row. Repeat 11th and 12th rows 3 times, then work 6 more rows even, break thread.

HIND LEG. Attach thread in 13th st from end of row, work 1 s c in each of the next 12 sts, ch 1, turn, and work 2 rows even. 4th Row—Increase 1 s c at beginning of row, 1 s c in each remaining s c. 5th Row— Decrease 1 s c at beginning of row, 1 s c in each remaining s c. Repeat the 4th and 5th rows once and work 1 row even. Next 8 Rows—Decrease 1 s c at beginning of each row and work 10 more rows even, break thread. Attach thread at top of head at face, work 1 s c in each of the s c of top of head to back of neck, ch 1, turn. Work 1 s c in each s c across top of head, down front of face, around mouth and up to under neck, ch 1, turn. Work 1 more row of s c all around head then work about 5 s c down back of neck, break thread. Work another section in the same manner.

UNDER SECTION. Work 2 under sections following the first 5 rows of body. Then work front and hind leg on each section.

EARS. Ch 2, 1 s c in first st, ch 1 to turn. 2nd Row—2 s c in s c. 3rd Row—2 s c in first s c, 1 s c in next s c. Work 8 more rows increasing 1 s c at beginning of each row, then work 1 s c in each row down one side, 3 s c in the first st, 1 s c in each row up opposite side, break thread.

TAIL. Ch 6, join and work 1 s c in each st, without joining rows and working in back loop of st only work 1 s c in each s c for 14 rows.

FRINGE. * Draw up a loop on hook about 3 inches or length desired, hold loop on hook, s c in next s c, draw up another loop on hook, s c in same s c, draw up another loop on hook, s c in next s c, repeat from * twice. Work a few loops in same manner in about 3 or 4 rows for under part of tail, break thread. Cut loops.

MANE. Ch 51 and work 50 s c on ch, then work fringe same as tail fringe.

BLANKET. With 1 strand of Red and Small Hook ch 46 and work 45 s c on ch. 2nd Row—Ch 3, turn, * 2 d c in same space with ch 3, skip 3 s c, s c in next s c, ch 3, repeat from * across row. (Ch 3 to turn each row.) 3rd Row—2 d c in same space with ch 3, s c over the ch 3 of shell, * ch 3, 2 d c in same space, s c over the ch 3 of next shell, repeat from * across row. Attach White and work 1 row of White, 2 rows of Red, 1 row of White, 2 rows of Red, then work 1 row of shells all around blanket. Work a band of 2 shells to fit around horse.

TO ASSEMBLE HORSE. Lay the under sections on body sections matching legs. Sew around both legs and to body, then place both body sections together, leav-ing center of under section open for filling. Fill and sew together. Sew Tail, Ears and Blanket in position. Fold Mane in half, cut loops and sew in position. Embroider eyes or use buttons sewed into a small piece of white felt.

BRIDLE AND REINS are made to fit. Using a single strand of Red, make a ch long enough to fit around mouth, join and work a row of s c on ch. The Bit is a ch to fit from one side of band in mouth and attached to opposite side. Work a band around head, across front of head and reins made of 2 rows of s c, break thread.

Valentine Sweet Cozy

Cute Cat coveralls Instructions

Washcloth Babys

Cute wash cloth baby tutorial to be found at website HERE

How to silk screen

Learn How to make your own silk screen. For more Printmaking How-To Videos & Articles, visit WonderHowTo.

Crocheted Baby Hat

Easy Crocheted Baby Hat

 Judith Prindle

This measures 6&1/2 inches long to the eylets and 11 & 1/2 inches wide without stretching before it is stitched together.
Hook Size G
Redheart Baby Soft Yarn or Bernat Softee Baby Yarn
Always working in the back loop of each stitch for ribbed effect.
You also will be working in the same stitch as your turning chain through out. You just "ignore" the chain when you come to it, working only in the actual half double crochet.
Chain 36
Row 1: Half double crochet in second chain from hook and next 29 chains, single crochet in next chain, half double crohcet in last 4 chains. (34 half double crochet and 1 single crochet stitches).
Chain 2 and turn.
Row 2: Half double crochet in same stitch as turning chain, half double in next 3 stitches, chain 1 and skip the single crochet, half double crochet in next 30 stitches. ( 34 half double crochet and 1 chain) .
Chain 2 and turn.
Row 3: Half double crochet in same stitch as turning chain 2 and in next 29 stitches, single crochet in hole made by chain 1 loop, half double crochet in next 4 stitches. (34 half double crochet and 1 single crochet.)
Chain 2 and turn.
Repeat rows 2 and 3 for a total of 34 rows, except on last row do a slip stitch in the single crochet. Sew up seam.
Make a chain of 50-55 stitches or cut a length of ribbon to thread through eyelet holes. Tie in a bow. This opening can allow for wires if needed while baby is in the hospital.
Easy Newborn Baby Booties To Match the Hat
 Judith Prindle
Size G Hook
Redheart Baby Soft Yarn or Bernat Softee Baby Yarn.
Measures about 3 & 1/2 inches square before it is crocheted together.
Working in back loop through out.
Chain 21 stitches.
Row 1: Half double crochet in second chain from hook and each chain remaining. ( 20 half double crochet stitches) Chain 2 and turn.
Row 2: Half double crochet in same stitch as turning chain 2 and in each half double crochet remaining. (20 half double crochet) Chain 2 and turn. Just ignore the chain 2 when you come to it, same as the hat.
Repeat row 2 until you have a total of 20 rows.
Turn your piece and working across the end of the rows, single crochet in the end of each half double crochet row. (total of 20 single crochet stitches)
Round One of top:
Fold the bootie in half , turn, and single crochet the toe together across the top, for a total of seven single crochet.
Now working in the one side of the bootie, half double crochet in the next 13 stitches continue around the other side of the bootie half double crochet in next 13 stitches on the other side. The back of the bootie will be open. Join by slip stitching around the beginning chain 2.
Round Two of Top:
Half double crochet around front of next half double crochet,
half double crochet around back of next half double crochet,
repeat this pattern to end of round, slip stitch around beginning
chain 2.
Round Three of top: Repeat round two. End off. Sew up the heel seam.
Either crochet a length of yarn to fit around bootie or use a ribbon. Thread this through the first round of the bootie top and tie.

Gifts in a Jar

Great Tutorial fun gift for teachers and friends

Cookies For Samta

Link Found HERE